Short-Chain Sulfur Confined into Nitrogen-Doped Hollow Carbon Nanospheres for High-Capacity Potassium Storage.

Carbon-based materials are one of the ideal negative electrode materials for potassium ion batteries. However, the limited active sites and sluggish diffusion ion kinetics still hinder its commercialization process. To address these problems, we design a novel carbon composite anode, by confining highly reactive short-chain sulfur molecules into nitrogen-doped hollow carbon nanospheres (termed SHC-450). The formation process involves the controlled synthesis of hollow polyaniline (PANI) nanospheres as precursors via an Ostwald ripening mechanism and subsequent sulfuration treatment. The high content of constrained short-chain sulfur molecules (20.94 wt%) and considerable N (7.15 wt%) ensure sufficient active sites for K+ storage in SHC-450. Accordingly, the SHC-450 electrode exhibits a high reversible capacity of 472.05 mAh g-1 at 0.1 A g-1 and good rate capability (172 mAh g-1 at 2 A g-1). Thermogravimetric analysis shows that SHC-450 has impressive thermal stability to withstand a high temperature of up to 640 °C. Ex situ spectroscopic characterizations reveal that the short-chain sulfur provides high capacity through reversible formation of K2S. Moreover, its special hollow structure not only provides ample space for highly active short-chain sulfur reactants but also effectively mitigates volume expansion during the sulfur conversion process. This work offers new perspectives on enhanced K+ storage performance from an interesting anode design and the space-limited domain principle.

Co/Al Co-Substituted Layered Manganese-Based Oxide Cathode for Stable and High-Rate Potassium-Ion Batteries.

Manganese-based layered oxides are promising cathode materials for potassium-ion batteries (PIBs) due to their low cost and high theoretical energy density. However, the Jahn-Teller effect of Mn3+ and sluggish diffusion kinetics lead to rapid electrode deterioration and a poor rate performance, greatly limiting their practical application. Here, we report a Co/Al co-substitution strategy to construct a P3-type K0.45Mn0.7Co0.2Al0.1O2 cathode material, where Co3+ and Al3+ ions occupy Mn3+ sites. This effectively suppresses the Jahn-Teller distortion and alleviates the severe phase transition during K+ intercalation/de-intercalation processes. In addition, the Co element contributes to K+ diffusion, while Al stabilizes the layer structure through strong Al-O bonds. As a result, the K0.45Mn0.7Co0.2Al0.1O2 cathode exhibits high capacities of 111 mAh g-1 and 81 mAh g-1 at 0.05 A g-1 and 1 A g-1, respectively. It also demonstrates a capacity retention of 71.6% after 500 cycles at 1 A g-1. Compared to the pristine K0.45MnO2, the K0.45Mn0.7Co0.2Al0.1O2 significantly alleviates severe phase transition, providing a more stable and effective pathway for K+ transport, as investigated by in situ X-ray diffraction. The synergistic effect of Co/Al co-substitution significantly enhances the structural stability and electrochemical performance, contributing to the development of new Mn-based cathode materials for PIBs.

Anomalous Detachment Behavior and Directional Reconstruction Regulation of Leaching-Type Precatalysts for Industrial Water Electrolyzers.

Current reconstruction chemistry studies are mainly operated at the laboratory scale, where the operating parameters are different from those used in industrial water electrolyzers. This gap leads to unclear reconstruction behaviors under industrial conditions and constrains the application of catalysts. Here, this work presents a new reconstruction mechanism and anomalous detachment phenomena observed in leaching-type oxygen-evolving precatalysts under industrial conditions, different from the reported results obtained under laboratory conditions. The identified detachment issues are closely linked to the production of a potassium salt separate phase, which proves sensitive to the local environment, and its instability easily leads to catalyst stripping from the substrate. By establishing detachment critical point and operating parameter-detachment correlation, a targeted reconstruction strategy is proposed to achieve smooth ligand leaching and effectively solve the detachment issue. Theoretical analyses validate the dual-site regulation in directionally reconstructed catalysts with optimized intermediate adsorption. Under industrial conditions, the coupled electrolyzer delivers an industrial-level current density at low cell voltage with prolonged durability, 1 A cm-2 at 2 V for over 340 h. This work bridges the gap of leaching-type precatalysts between laboratory test conditions and industrial operating conditions.

Progress on Transition Metal Ions Dissolution Suppression Strategies in Prussian Blue Analogs for Aqueous Sodium-/Potassium-Ion Batteries.

Aqueous sodium-ion batteries (ASIBs) and aqueous potassium-ion batteries (APIBs) present significant potential for large-scale energy storage due to their cost-effectiveness, safety, and environmental compatibility. Nonetheless, the intricate energy storage mechanisms in aqueous electrolytes place stringent requirements on the host materials. Prussian blue analogs (PBAs), with their open three-dimensional framework and facile synthesis, stand out as leading candidates for aqueous energy storage. However, PBAs possess a swift capacity fade and limited cycle longevity, for their structural integrity is compromised by the pronounced dissolution of transition metal (TM) ions in the aqueous milieu. This manuscript provides an exhaustive review of the recent advancements concerning PBAs in ASIBs and APIBs. The dissolution mechanisms of TM ions in PBAs, informed by their structural attributes and redox processes, are thoroughly examined. Moreover, this study delves into innovative design tactics to alleviate the dissolution issue of TM ions. In conclusion, the paper consolidates various strategies for suppressing the dissolution of TM ions in PBAs and posits avenues for prospective exploration of high-safety aqueous sodium-/potassium-ion batteries.

Rapid-charging aluminium-sulfur batteries operated at 85 °C with a quaternary molten salt electrolyte.

Molten salt aluminum-sulfur batteries are based exclusively on resourcefully sustainable materials, and are promising for large-scale energy storage owed to their high-rate capability and moderate energy density; but the operating temperature is still high, prohibiting their applications. Here we report a rapid-charging aluminium-sulfur battery operated at a sub-water-boiling temperature of 85 °C with a tamed quaternary molten salt electrolyte. The quaternary alkali chloroaluminate melt - possessing abundant electrochemically active high-order Al-Cl clusters and yet exhibiting a low melting point - facilitates fast Al3+ desolvation. A nitrogen-functionalized porous carbon further mediates the sulfur reaction, enabling the battery with rapid-charging capability and excellent cycling stability with 85.4% capacity retention over 1400 cycles at a charging rate of 1 C. Importantly, we demonstrate that the asymmetric sulfur reaction mechanism that involves formation of polysulfide intermediates, as revealed by operando X-ray absorption spectroscopy, accounts for the high reaction kinetics at such temperature wherein the thermal management can be greatly simplified by using water as the heating media.

Comprehensive Understandings of Hydrogen Bond Chemistry in Aqueous Batteries.

Aqueous batteries are emerging as highly promising contenders for large-scale grid energy storage because of uncomplicated assembly, exceptional safety, and cost-effectiveness. The unique aqueous electrolyte with a rich hydrogen bond (HB) environment inevitably has a significant impact on the electrode materials and electrochemical processes. While numerous reviews have focused on the materials design and assembly of aqueous batteries, the utilization of HB chemistry is overlooked. Herein, instead of merely compiling recent advancements, this review presents a comprehensive summary and analysis of the profound implication exerted by HB on all components of the aqueous batteries. Intricate links between the novel HB chemistry and various aqueous batteries are ingeniously constructed within the critical aspects, such as self-discharge, structural stability of electrode materials, pulverization, solvation structures, charge carrier diffusion, corrosion reactions, pH sensitivity, water splitting, polysulfides shuttle, and H2 S evolution. By adopting a vantage point that encompasses material design, binder and separator functionalization, electrolyte regulation, and HB optimization, a critical examination of the key factors that impede electrochemical performance in diverse aqueous batteries is conducted. Finally, insights are rendered properly based on HB chemistry, with the aim of propelling the advancement of state-of-the-art aqueous batteries.

Potassium-Based Dual-Ion Batteries Operating at -60 °C Enabled By Co-Intercalation Anode Chemistry.

Battery performance at subzero is restricted by sluggish interfacial kinetics. To resolve this issue, potassium-based dual-ion batteries (K-DIBs) based on the polytriphenylamine (PTPAn) cathode with anion storage chemistry and the hydrogen titanate (HTO) anode with K+ /solvent co-intercalation mechanism are constructed. Both the PTPAn cathode and the HTO anode do not undergo the desolvation process, which can effectively accelerate the interfacial kinetics at subzero. As revealed by theoretical calculations and experimental analysis, the strong K+ /solvent binding energy in the dilute electrolyte, the charge shielding effect of the crystal water, and the uniform SEI layer with high content of the flexible organic species synergically promote HTO to undergo K+ /solvent co-intercalation behavior. The special co-intercalation mechanism and anion storage chemistry enable HTO||PTPAn K-DIBs with superior rate performance and cycle durability, maintaining a capacity retention of 94.1% after 6000 cycles at -40 °C and 91% after 1000 cycles at -60 °C. These results provide a step forward for achieving high-performance energy storage devices at low temperatures.

Surface passivation for highly active, selective, stable, and scalable CO2 electroreduction.

Electrochemical conversion of CO2 to formic acid using Bismuth catalysts is one the most promising pathways for industrialization. However, it is still difficult to achieve high formic acid production at wide voltage intervals and industrial current densities because the Bi catalysts are often poisoned by oxygenated species. Herein, we report a Bi3S2 nanowire-ascorbic acid hybrid catalyst that simultaneously improves formic acid selectivity, activity, and stability at high applied voltages. Specifically, a more than 95% faraday efficiency was achieved for the formate formation over a wide potential range above 1.0 V and at ampere-level current densities. The observed excellent catalytic performance was attributable to a unique reconstruction mechanism to form more defective sites while the ascorbic acid layer further stabilized the defective sites by trapping the poisoning hydroxyl groups. When used in an all-solid-state reactor system, the newly developed catalyst achieved efficient production of pure formic acid over 120 hours at 50 mA cm-2 (200 mA cell current).

A solution-to-solid conversion chemistry enables ultrafast-charging and long-lived molten salt aluminium batteries.

Conventional solid-to-solid conversion-type cathodes in batteries suffer from poor diffusion/reaction kinetics, large volume changes and aggressive structural degradation, particularly for rechargeable aluminium batteries (RABs). Here we report a class of high-capacity redox couples featuring a solution-to-solid conversion chemistry with well-manipulated solubility as cathodes-uniquely allowed by using molten salt electrolytes-that enable fast-charging and long-lived RABs. As a proof-of-concept, we demonstrate a highly reversible redox couple-the highly soluble InCl and the sparingly soluble InCl3-that exhibits a high capacity of about 327 mAh g-1 with negligible cell overpotential of only 35 mV at 1 C rate and 150 °C. The cells show almost no capacity fade over 500 cycles at a 20 C charging rate and can sustain 100 mAh g-1 at 50 C. The fast oxidation kinetics of the solution phase upon initiating the charge enables the cell with ultrafast charging capability, whereas the structure self-healing via re-forming the solution phase at the end of discharge endows the long-term cycling stability. This solution-to-solid mechanism will unlock more multivalent battery cathodes that are attractive in cost but plagued by poor reaction kinetics and short cycle life.

Proton/Mg2+ Co-Insertion Chemistry in Aqueous Mg-Ion Batteries: From the Interface to the Inner.

Co-insertion of protons happens widely and enables divalent-ion aqueous batteries to achieve high performances. However, detailed investigations and comprehensive understandings of proton co-insertion are scarce. Herein, we demonstrate that proton co-insertion into tunnel materials is determined jointly by interface derivation and inner diffusion: at the interface, hdrated Mg2+ has poor insertion kinetics, and therefore accumulates and hydrolyzes to produce protons; in the tunnels, co-inserted/lattice H2 O molecules block the Mg2+ diffusion while facilitate the proton diffusion. When monoclinic vanadium dioxide (VO2 (B)) anode is tested in Mg(CH3 COO)2 aqueous solution, the formation of Mg-rich solid electrolyte interphase on the VO2 (B) electrode and co-insertion of derived protons are probed; in the tunnels, the diffusion energy barrier of Mg2+ +H2 O is 2.7 eV, while that of the protons is 0.37 eV. Thus, protons dominate the subsequent insertion and inner diffusion. As a consequence, the VO2 (B) achieves a high capacity of 257.0 mAh g-1 at 1 A g-1 , a high rate retention of 59.1 % from 1 to 8 A g-1 , and stable cyclability of 3000 times with a capacity retention of 81.5 %. This work provides an in-depth understanding of the proton co-insertion and may promote the development of rechargeable aqueous batteries.

Dual-Responsive Triple-Synergistic Fe-MOF for Tumor Theranostics.

The intelligent responsive drug delivery system has great application potential in cancer precision therapy. Although many antitumor methods have been developed based on drug delivery systems, most of them yet suffer from poor antitumor efficiency. In this project, a near-infrared and pH dual-response multimodal collaborative platform for diagnosis and treatment (PCN-DOX@PDA) was constructed. We used PCN-600 as a vehicle loaded with antineoplastic drugs and polydopamine (PDA). Under 633 nm laser irradiation, the ligand tetrakis(4-carboxyphenyl)porphyrin (TCPP) in PCN-600 can generate singlet oxygen (1O2) and kill tumor cells. PDA is used as photothermal agent of PTT. PCN-DOX@PDA achieves the intelligent release of antitumor drugs by responding to the weak acidity of the tumor microenvironment and thermal stimulation generated by NIR irradiation. In addition, since the central ion of PCN is Fe3+, PCN-DOX@PDA realizes the diagnosis and treatment of tumors through magnetic resonance imaging-mediated tumor chemotherapy and photothermal and photodynamic synergistic therapy. This triple synergistic strategy showed excellent biocompatibility and antitumor ability in in vivo experiments on a 4T1 tumor-bearing mouse model, indicating that PCN-DOX@PDA has a good development prospect in the field of precision cancer therapy and diversified biomedical applications.

Bioresource Upgrade for Sustainable Energy, Environment, and Biomedicine.

We conceptualize bioresource upgrade for sustainable energy, environment, and biomedicine with a focus on circular economy, sustainability, and carbon neutrality using high availability and low utilization biomass (HALUB). We acme energy-efficient technologies for sustainable energy and material recovery and applications. The technologies of thermochemical conversion (TC), biochemical conversion (BC), electrochemical conversion (EC), and photochemical conversion (PTC) are summarized for HALUB. Microalgal biomass could contribute to a biofuel HHV of 35.72 MJ Kg-1 and total benefit of 749 $/ton biomass via TC. Specific surface area of biochar reached 3000 m2 g-1 via pyrolytic carbonization of waste bean dregs. Lignocellulosic biomass can be effectively converted into bio-stimulants and biofertilizers via BC with a high conversion efficiency of more than 90%. Besides, lignocellulosic biomass can contribute to a current density of 672 mA m-2 via EC. Bioresource can be 100% selectively synthesized via electrocatalysis through EC and PTC. Machine learning, techno-economic analysis, and life cycle analysis are essential to various upgrading approaches of HALUB. Sustainable biomaterials, sustainable living materials and technologies for biomedical and multifunctional applications like nano-catalysis, microfluidic and micro/nanomotors beyond are also highlighted. New techniques and systems for the complete conversion and utilization of HALUB for new energy and materials are further discussed.

Dense T-Nb2O5/Carbon Microspheres for Ultrafast-(Dis)charge and High-Loading Lithium-Ion Batteries.

Orthorhombic niobium pentoxide (T-Nb2O5) is regarded as a potential anode material for lithium-ion batteries (LIBs) due to ultrafast charge/discharge and high safety. However, the poor electronic conductivity and low mass loading of nanostructured T-Nb2O5 limit its practical application in LIBs. Herein, we design and construct dense microspheres consisting of nanostructured T-Nb2O5 embedded in amorphous N-doped carbon (Nb2O5@NC) via a facile method to achieve fast ionic and electronic transport as well as a high mass loading. The dense micro-sized particles with an interconnected carbon network avoid the low mass loading and volumetric energy density of conventional nanostructures. Interconnected pores in the range of a few nanometers are also formed in the Nb2O5@NC microspheres. Notably, at a high mass loading of 12.8 mg cm-2, Nb2O5@NC can achieve a high specific capacity of 171.5 mAh g-1 and an areal capacity of 2.05 mAh cm-2, showing its high lithium storage capacity. The intercalation reaction mechanism with a small volume change during cycling at both crystal lattice and microsphere levels is confirmed by in situ X-ray diffraction and in situ high-resolution transmission electron microscopy. The elegant structure and the electrochemical reaction mechanism disclosed in the work is important for designing ultrafast-(dis)charge electrode materials.

Fast-charging aluminium-chalcogen batteries resistant to dendritic shorting.

Although batteries fitted with a metal negative electrode are attractive for their higher energy density and lower complexity, the latter making them more easily recyclable, the threat of cell shorting by dendrites has stalled deployment of the technology1,2. Here we disclose a bidirectional, rapidly charging aluminium-chalcogen battery operating with a molten-salt electrolyte composed of NaCl-KCl-AlCl3. Formulated with high levels of AlCl3, these chloroaluminate melts contain catenated AlnCl3n+1- species, for example, Al2Cl7-, Al3Cl10- and Al4Cl13-, which with their Al-Cl-Al linkages confer facile Al3+ desolvation kinetics resulting in high faradaic exchange currents, to form the foundation for high-rate charging of the battery. This chemistry is distinguished from other aluminium batteries in the choice of a positive elemental-chalcogen electrode as opposed to various low-capacity compound formulations3-6, and in the choice of a molten-salt electrolyte as opposed to room-temperature ionic liquids that induce high polarization7-12. We show that the multi-step conversion pathway between aluminium and chalcogen allows rapid charging at up to 200C, and the battery endures hundreds of cycles at very high charging rates without aluminium dendrite formation. Importantly for scalability, the cell-level cost of the aluminium-sulfur battery is projected to be less than one-sixth that of current lithium-ion technologies. Composed of earth-abundant elements that can be ethically sourced and operated at moderately elevated temperatures just above the boiling point of water, this chemistry has all the requisites of a low-cost, rechargeable, fire-resistant, recyclable battery.

Towards a Stable Layered Vanadium Oxide Cathode for High-Capacity Calcium Batteries.

Calcium-based batteries have promising advantages over multivalent ion batteries. However, the fabrication of highly efficient calcium batteries is limited by the quality of available cathode materials, which motivates the exploration of electrodes that can enable reversible, stable Ca2+ intercalation. Herein, layered vanadium oxide Mgx V2 O5 ·nH2 O is used as a calcium battery cathode, and it exhibits a high capacity of 195.5 mA h g-1 at 20 mA g-1 and an outstanding cycling life (93.6% capacity retention after 2500 cycles at 1 A g-1 ). Combining theoretical analysis and experimental design, a series of layered oxides (Mx V2 O5 ·nH2 O, M = Mg, Ca, Sr) is selected as a model system to identify the Ca storage mechanism. It is found that the hydrated alkaline earth metal ions in the vanadium-based layered oxide interlayers play a critical role as pillared stabilizers to facilitate Ca2+ insertion/extraction. Compared with Ca2+ and Sr2+ , the presence of Mg2+ provides vanadium oxides with a rigid framework that allows for minimized volume fluctuation (a tiny variation of ≈0.15 Å of the interlayer spacing). Such an understanding of the Ca storage mechanism is a key step in the rational design and selection of materials for calcium batteries to achieve a high capacity and long cycle life.

In Situ Atomic-Scale Observation of Electrochemical (De)potassiation in Te Nanowires.

Potassium-ion batteries (PIBs) have great potential in energy storage due to their high abundance and low cost of potassium resources. Tellurium (Te) is a promising PIB cathode due to its high volumetric capacity and good electronic conductivity. However, the electrochemical (de)potassiation mechanism of Te remains elusive due to the lack of an effective method of directly observing the dynamic reaction at atomic resolution. Here, the phase transformations of single crystal Te on (de)potassiation are clearly revealed by in situ high-resolution transmission electron microscopy and electron diffraction. Te undergoes a consecutive phase transformation during potassiation: from Te to K2 Te3 in the initial potassiation, and then part of the K2 Te3 to K5 Te3 on further potassiation. The reaction has extremely high reversibility in the following depotassiation. By atomic-scale observation, an anisotropic reaction mechanism where K+ intercalates into Te crystalline lattice preferentially through the (001) plane (having a large d-spacing) is established during potassiation. While in the depotassiation process, K ions extract from the polycrystalline Kx Te along the same diffusion path to form single crystal Te, indicating the potassium storage is highly reversible. The strong orientation-dependent (de)potassiation mechanism revealed by this work provides implications for the future design of nanostructured cathodes for high-performance PIBs.

Atomic Sn-enabled high-utilization, large-capacity, and long-life Na anode.

Constructing robust nucleation sites with an ultrafine size in a confined environment is essential toward simultaneously achieving superior utilization, high capacity, and long-term durability in Na metal-based energy storage, yet remains largely unexplored. Here, we report a previously unexplored design of spatially confined atomic Sn in hollow carbon spheres for homogeneous nucleation and dendrite-free growth. The designed architecture maximizes Sn utilization, prevents agglomeration, mitigates volume variation, and allows complete alloying-dealloying with high-affinity Sn as persistent nucleation sites, contrary to conventional spatially exposed large-size ones without dealloying. Thus, conformal deposition is achieved, rendering an exceptional capacity of 16 mAh cm-2 in half-cells and long cycling over 7000 hours in symmetric cells. Moreover, the well-known paradox is surmounted, delivering record-high Na utilization (e.g., 85%) and large capacity (e.g., 8 mAh cm-2) while maintaining extraordinary durability over 5000 hours, representing an important breakthrough for stabilizing Na anode.

Eutectic Electrolyte with Unique Solvation Structure for High-Performance Zinc-Ion Batteries.

Zinc-ion batteries (ZIB) present great potential in energy storage due to low cost and high safety. However, the poor stability, dendrite growth, and narrow electrochemical window limit their practical application. Herein, we develop a new eutectic electrolyte consisting of ethylene glycol (EG) and ZnCl2 for dendrite-free and long-lifespan ZIBs. The EG molecules participate in the Zn2+ solvation via coordination and hydrogen-bond interactions. Optimizing the ZnCl2 /EG molar ratio (1 : 4) can strengthen intermolecular interactions to form [ZnCl(EG)]+ and [ZnCl(EG)2 ]+ cations. The dissociation-reduction of these complex cations enables the formation of a Cl-rich organic-inorganic hybrid solid electrolyte interphase film on a Zn anode, realizing highly reversible Zn plating/stripping with long-term stability of ≈3200 h. Furthermore, the polyaniline||Zn cell manifests decent cycling performance with ≈78 % capacity retention after 10 000 cycles, and the assembled pouch cell demonstrates high safety and stable capacity. This work opens an avenue for developing eutectic electrolytes for high-safety and practical ZIBs.

Amine-Wetting-Enabled Dendrite-Free Potassium Metal Anode.

Considered as an imperative alternative to the commercial LiFePO4 battery, the potassium metal battery possesses great potential in grid-scale energy storage systems due to the low cost, low standard redox potential, and high abundance of potassium. The potassium dendrite growth, large volume change, and unstable solid electrolyte interphase (SEI) on the potassium metal anode have, however, hindered its applications. Although conductive scaffolds coupling with potassium metal have been widely proposed to address the above issues, it remains challenging to fabricate a uniform composite with uncompromised capacity. Herein, we propose a facile and efficient strategy to construct dendrite-free and practical carbon-based potassium composite anodes via amine functionalization of the carbon scaffolds that enables fast molten potassium infusion within several seconds. On the basis of experiments and theoretical calculations, we show that highly potassiophilic amine groups immediately transform carbon scaffolds from nonwetting to wetting to postassium. Our carbon-cloth-based potassium composite anode (K@CC) can accommodate volume fluctuation, provide abundant nucleation sites, and lower the local current density, achieving nondendritic morphology with a stable SEI. The fabricated K0.7Mn0.7Ni0.3O2|K@CC full cell displays excellent rate capability and an ultralong lifespan over 8000 cycles (68.5% retention) at a high current of 1 A g-1.